Carel X-Plus - Future of Steam Humidifiers

Carel X-Plus HumiSteam Whole House Humidifier, 3.3Lbs/hour to 286 Lbs/hour of Steam

HumiSteam X-Plus Steam Immersed Electrode Humidifier with LCD Display Digital Controller, is the result of CAREL’s thirty-year experience in the field of steam humidification, and is the most rational choice for a wide variety of applications: civil environments, offices, industrial facilities and steam baths. The Carel humiSteam X-Plus humidifiers have been designed to offer maximum reliability, minimum maintenance and ease of use. This has been made possible by the development of custom microprocessor-based controls that fully monitor and automate all functions of humiSteam, while allowing the customer to choose between economical on/off operation or stand-alone / DDC proportional operation

By combining its engineering expertise with technological innovations, Carel has been able to redefine residential Steam Humidification by introducing THE "HEALTH CONSCIOUS" SYSTEM THAT IS RIGHT FOR YOU.The operation of immersed electrode steam humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water until producing steam (Joule effect). The quantity of steam produced is proportional to the electric current, which is in turn proportional to the level of water. This electric current is measured by a current transformer: by varying the level of water using a fill and drain electrovalve, the current, and consequently the steam production, can be precisely modulated. Due to evaporation, the level of water decreases and must therefore be topped up.

As the steam does not carry minerals, the salt concentration in the water and therefore the conductivity increases, meaning that the water has to be periodically diluted by draining part of it using the drain solenoid valve and replacing it with fresh water. In addition, lime scale is deposited over time and covers part of the cylinder, which must be replaced or cleaned.
The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing.

CAREL has been manufacturing immersed electrode steam humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software. The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam. Customers benefit from clean, fresh air in a more comfortable environment, while optimizing energy efficiency and protecting their homes.

Carel UE001XU0U0 X-Plus HumiSteam Whole House Humidifier at glance:

AFS SYSTEM (Anti Foaming System)

Detects foam to prevent the release of droplets together with the steam to improve Indoor Air Quality.

LARGE STEAM CYLINDERS with galvanised electrodes and anti-scale filter on the bottom

For longer maintenance-free operation. Openable and fireproof cylinders are also available.

CONTINUOUS MODULATION

Features a steam production with continuous modulation from 20% to the max. flowrate (from 10% for the models with two cylinders).

CONDUCTIVITY SENSOR AND CONTROL SOFTWARE

Built-in conductivity sensor and control software to optimise energy efficiency and operating life, with constant performance over the life of the cylinder in order to ensure the most comfortable indoor environment.

CHOICE OF CONTROLLERS.

"Y" (proportional or ON/OFF from external controller and icon-based display); "X" (modulating with built-in controller based on pCO technology and alphanumeric and graphic display with extended messages),"W" (similar to the "X" controller, however designed for steam baths).

DUCT CONDENSATE PREVENTION.

model "X" manages a second "limit" probe to reduce production and prevent any condensate forming in the air duct.

CAREL WALL CONTROL.

Alphanumeric and graphic LCD (up to 8 rows); 6 buttons, so you can optimize your energy consumption while keeping your home's air fresher than ever.

New start-up algorithm, extendedwater range 75-1250 mS/cm.

New drain pump also on small units, instead of solenoid type drain valve, to avoid clogging with any type of water and increase cylinder lifetime.

Water conductivity range extended to 75 - 1250 mS/cm.

Standard "drain tempering".

Whole range from 3.3, to 286 lbs/hr, new 40 lbs/hr.

User interface in several languages. Programmable control from pCO family. The user interface can be mounted remote.

Automatic water concentration management.

Signals: 0-1V, 0-10V, 0-20mA, 4-20mA, 0-135 Ohm.

Cylinder lifetime counter.

Remote diagnostics via GSM. Optional connectivity protocols: Carel, LON, BacNet, Modbus, TCP/IP.

Stainless steel steam distributor for duct.

Simple and easy installation to furnace ducting or stand alone option

Improved metal casing

What is Included in Carel UE001XU0U0 X-Plus HumiSteam Whole House Humidifier?

1- UE001XU0U0 - 208/1/60 Standard Disposable Cylinder 350 to 1250 MicroSiemens.

1- SDPOEM0022 Carel Jet Distributor.

10'- SHOSE00022 Rubber Steam Hose 30mm.

13'- CHOSE00038 Rubber Condensate Hose 3/8.

1- HC-201 Duct Mount Humidistat 20-95% RH.

1- PC-301 Duct Mount Differential Air Pressure Switch.

Why Should You Have One in Your House?

During the winter months as the outside temperature drops, so does the relative humidity indoors. This dry, thirsty air begins to absorb moisture from everything it touches including woodwork, furniture, paintings, books, and even YOU. As this moisture is pulled from materials, damage to those materials can result. The paper of rare books will become brittle and yellow. The leather bindings will crack. Cracks will appear in wood floors and the finish will become dull. Furniture will warp and become loose at the joints. Rare paintings can be destroyed in a few years as the paint cracks and flakes from the canvas. Expensive carpets don't seem to last, doors no longer fit their jams, and household plants lose their heartiness. And you will suffer from uncomfortable dry nose and throat and the dreaded "door knob static electricity shock" (great for your personal computer also). The dust count will increase along with a legion of airborne opportunists such as mites, bacteria and viruses playing havoc with any allergies.

What is this Mean For YOU? That most of these nasties are least effective at making you miserable if you keep your indoor humidity in the range of 40 to 60 %. Additionally, when the relative humidity is kept above 35% most static electricity problems disappear. Most homes can reach humidity levels as low as 7% in the winter. This compares to the Sahara Desert which averages around 12% relative humidity! In new homes this dry air can also cause increased out-gassing of solvents from carpets, wood paneling and other materials, increasing the Aldehydes in the air you breathe.

Indoor air quality is important to human health because we spend over 80% of our time indoors. Tight insulation, too less humidity and other factors can lead to unhealthy air in your home or workplace, causing a number of health problems

Improving humidification is basic to air quality, especially if your home is new or recently remodeled.

Product Warranty

Limited 2 years on parts

One More Reason to have Carel Steam Humidifier in Your House

Bottom line: humidify your home to 40 to 45% and stop worrying about your furniture, artwork, books, paintings and plants. Wake up in the morning without feeling you need to drink a lake. Stop being afraid to touch a door knob for fear of being shocked. CAREL USA can provide humidification to safeguard any home, from 1,000 square feet to 100,000 square feet.

Carel UE001XU0U0 X-Plus HumiSteam Whole House Humidifier is the optimum solution for you and your family who deserves to live in excellent Indoor Air Quality.

Peerless PureFire High Efficiency Hot Water Boilers are Here to Make You Warm for Smaller Heating Bill.

The Peerless PUREFIRE PF gas-fired condensing boiler is a high-efficiency boiler for residential and commercial applications and is available for either natural or LP gas. The direct vent, sealed combustion boiler has an ultra-high 97.3% efficiency and is ENERGY STAR approved! The Peerless PUREFIRE PF, now available in six sizes, has ASME and ETL certifications for both the U.S. and Canada and is the most thoroughly tested high efficiency boiler on the market! A unique condensate system with built-in neutralizer component and float switch protection is a top feature of the boiler.

Other great features of PEERLESS PUREFIRE PF high efficiency condensing gas fire boilers are include a high grade stainless steel burner and heat exchanger, 120 volt convenience outlet and LoNOx operation for the good of the environment. The PUREFIRE’s fully modulating burner assures dependable operation and maximum boiler efficiency. Zero clearance to combustibles, easy access to controls and leveling legs are other standard features that allow for ease of installation and maintenance. Boilers are easily converted from LP to natural gas and from natural gas to LP without any additional parts. The PUREFIRE is equipped with a full one-year parts and labor warranty.

This boiler qualifies for up to $1,500 Federal Tax Credits for Energy Efficiency! This energy tax credit covers 30% of the equipment, installation supplies, and labor costs up to $1,500.

Features and Benefits of The Peerless PUREFIRE PF boiler at a glance:

Energy Star Rated

ENERGY STAR products make a difference in our homes, our environment and our future. By using ENERGY STAR products in your home, you can battle global warming and pollution all while saving money. More efficient appliances lead to lower energy bills. As an Energy Star Partner, Peerless can help you save money today and our environment in the future

Stainless steel heat exchanger

The heart of the Peerless PureFire boiler is the ASME-certified stainless steel heat exchanger. Each heat exchanger is factory hydrotested to insure quality and reliability.

Variable Speed Blower Assembly

Constantly matches combustion output to your heating needs.

Condensate System

Built-in Neutralizer System with Float Switch Protection.

State-of-the-Art Control Board Features

LCD Status Display Module Features Plain English, Easy-to-Read Status and Troubleshooting Text.

Fully Modulating Burner for Maximum Efficiency.

3 to 1 Flame Modulation Assures Dependable Operation and Increases Boiler Efficiency.

Peerless PF-50 PUREFIRE High Efficiency Modulating Gas Hot Water Boiler Other Standard Features :

All Peerless PUREFIRE Boilers Have ASME and ETL Approvals for U.S. and Canada.

Environmentally Friendly, Low Emissions with a Rating of Less than 30PPM NOx, Exceeds National as well as Stringent Southern California Standards.

Sleek, Modern Design with Easy to Access Controls and Visible System/Boiler Monitoring.

Zero Clearance to Combustibles - Allows for Maximum Installation Flexibility.

High Grade Stainless Steel Burner and Heat Exchanger.

Sealed Cabinet Prevents Combustion Noises and Odors.

Factory tested

Boiler Outdoor reset temperature sensor

Dual Flame Sensing to Promote Reliable Firing and Safe Operation.

Direct Spark Ignition

Automatic air vent

Pressure gauge

Leveling Legs to Insure Proper Installation and Condensate Removal

NTC temperature sensors on the boiler supply/return and flue

120V Power switch

Low water protection

Domestic hot water priority

High temperature limit protection

Boiler freeze protection

Peerless PUREFIRE Warranty

1 year parts and labor / 12 years heat exchanger

A new era begins with the ultra-efficient and environmentally-friendly Eko 1.5 HRV air exchanger by Venmar

A new era begins with the ultra-efficient and environmentally-friendly Venmar Eko 1.5 HRV Air Exchanger. At a time when the green movement is of paramount importance and influences these consumers’ buying decisions, Venmar Ventilation innovates by launching the completely new EKO. Intended to be the most energy-efficient HRV air exchanger on the market, its innovative design makes optimal performance in terms of energy recovery possible;while at the same time substantially reduces energy costs. This exceptional innovation provides an ideal, environmentally friendly solution for residential ventilation, meeting the expectations of the most discerning consumers.

By combining its engineering expertise with technological innovations, Venmar Ventilation has been able to redefine residential ventilation by introducing Venmar Eko 1.5 HRV Air Exchanger. The energy consumption of its highperformancemotors can be compared to that of a compact fluorescent light bulb. Venmar Eko 1.5 HRV Air Exchanger can thus significantly lower energy costs while maintaining optimal output. Its core of Eko HRV recovers up to 80% of a home’s heat or cool air thanks to its additional energy efficiency. In fact, EKO exceeds energy conservation requirements!

Included with the Venmar EKO 1.5 HRV Air Exchanger - Altitude is the most evolved wall control on the market. Fully programmable, it features an impressive choice of operating modes, such as the Smart Mode feature, as well as an appealing, customizable LCD display.

Features and Benefits of Venmar Eko-1.5 Ultra-Efficient HRV Air Exchanger

With 2.53 CFM/watt, EKO 1.5 is the most efficient HRV in the industry.

Integrated electronic board on motor optimizes performance, keeps the motor cool and minimizes noise.

Significant electrical consumption savings (67% average compared to standard PSC motors).

Ideal for high performance new homes.

Compact footprint (25 5/8" H x 24 7/16" W x 15 1/8" D) allows an easy fit in restricted spaces.

Quick access to all components and electronics for easy maintenance.

6" diameter ports located on top of unit to simplify installation and provide a cleaner appearance.

All aspects designed to facilitate balancing of air flow and simplify installation.

Other Venmar Eko 1.5 HRV Standard Benefits

4 Ports.

Brings a continuous supply of fresh, filtered outside air into the home

Exhausts enviornmental contaminants for improved indoor air quality

Saves energy by recovering heat from exhaust air in the winter

Cools incoming air in the summer

Controls excess humidity

Why Should You Have One in Your House?

Poor indoor air quality is one of the top five most urgent enviornmental risks to public health

Proper ventilation will always make a positive contribution to indoor air quality aiding in the control of contaminants including moisture and mold

Indoor aie quality is important to human health because we spend over 80% of our time indoors. Tight insulation, too much humidity and other factors can lead to unhealthy air in your home or workplace, causing a number of health problems

Improving ventilation and airflow is basic to air quality, especially if your home is new or recently remodeled.

Product Warranty

Limited lifetime on core, 5 years on motors, and 5 years on parts

Viessmann Vitodens 200 WB2B High Efficiency Condensing Gas-Fired Hot Water Boiler - New Addition to the Viessmann Family of High Efficiency Boilers

We are introducing new addition to the great family of Viessmann High Efficiency Boilers. Finally new Viessmann Vitodens 200 WB2B High Efficiency Condensing Gas-Fired Hot Water Boiler is here!

The Vitodens 200, WB2B high specification boiler is one of the most efficient and quietest condensing boilers in this sector. It is now available for commercial applications of up to 4 cascaded boilers with total 1,500,000 BTU – good news if access is difficult, floor space is limited, if you prefer the reassurance of having more than one boiler running as a back-up - or if you want all the features of this great wall-hung gas condensing boiler. With an AFUE of 98% the Vitodens 200-W, WB2B is the most efficient boiler in its price range and is eligible for U.S. Federal Tax Credit. It is ENERGY STAR qualified and, together with the Vitodens 200, the only wall-mounted condensing boiler certified by the Government of Canada's Environmental Choice Program to be less harmful to the environment. The Vitodens 200 uses a full-modulation natural gas SA240 316 Ti stainless steel Inox-Radial heat exchanger constructed to CSA B51 and ASME Section IV to achieve reliable, whisper-quiet and low-emission combustion. All Vitodens 200 burners come factory-calibrated to save time during installation. The boiler is equipped with a built-in boiler Lambda Pro, industry-first intelligent combustion management system: Adjusts automatically to gas type and quality.
No fuel conversion kit required. The clean and simple control interface includes a reset button, digital LCD display and adjustable high limit. For DHW control, outdoor reset operation and more, the boiler control is able to interface with any level of external control.

Features and Benefits of Viessmann Vitodens 200-W, WB2B boiler at a glance

Outstanding Efficiency of up to 98% with full modulation and 96.1% A.F.U.E. on all models.

Lasting Performance with Viessmann-made SA240 316 Ti stainless steel Inox-Radial heat exchanger constructed to ASME Section IV and CSA B51.

Low-Emission Combustion with fully-modulating natural gas stainless steel cylinder burner. Factory calibration eliminates adjustments in the field.

Lambda Pro, industry-first intelligent combustion management system: Adjusts automatically to gas type and quality. No fuel conversion kit required.

Viessmann Vitotronic on-board multifunction outdoor reset boiler and system control for multi-temperature space and DHW heating.

Expanded Application Range with increased capacity up to 370 MBH. Multi-boiler installation up to 1480 MBH with up to 4 boilers (models WB2B 17-45 and up).

Multiple Venting Options - Sealed combustion coaxial, hybrid sealed combustion double-pipe vent system, single-wall CPVC or SS vent system.

Easy Installation, Service and Maintenance with all pipe connections located at the bottom and serviceable components easily accessible from the front.

Flexible installation thanks to left/right installation features for supply, return and gas piping including ignition system.

Compact, Lightweight Design and zero clearance to combustibles make it a great choice for limited-space installations.

Extremely Quiet Operation; quieter than most refrigerators.

Built-in Automatic Frost Protection allows boiler to be shut off for an extended period of time while protecting it against freeze-up.

True High-Altitude O peration up to 10000 ft / 3000 m with simple electronic adjustment.

Other Standard Features :

Limited Lifetime Heat Exchanger Warranty

2 years parts warranty

On-Board boiler control

Weather responsive variable speed pump (not included)

Vitodens control unit c/w outdoor sensor

Power module c/w pre-wired plug-in connections

Extremely low emissions of NOx and CO

Parallel electrode spark surfaces for extremely long life

Built-in condensate P-trap

All wiring connections c/w number coded plugs

Zero clearance to combustibles for all vent options

Burner modulation with flue gas adaptation

Domestic hot water priority

Differential air pressure sensor: shuts down burner in case of vent blockage

Boiler freeze protection

Factory tested.

Product Warranty

2 years parts / Limited Lifetime heat exchanger

Tekmar 256 Outdoor Reset Boiler Control

Tekmar Save Money on Home Heating Bills

Energy Saving Features

Outdoor Reset:


As the disparity between indoor & outdoor temperature increases, so does the rate of heat transfer from hot areas to cold.

A building's heat loss or gain depends considerably on two things:

Outdoor air temperature (as temperature difference between the exterior and interior increases, so does the rate of heat transfer) The building envelope's resistance to heat transfer (a higher R value in building materials will impede the transfer of heat) While a control will not impact the R-Value of building materials, it can ensure that the system does not waste heat by exceeding current requirements. Providing only the required amount of heat reduces fuel consumption, creating less pollution while saving you money.

How an Average Heating System Works...

When the interior air temperature drops below the thermostat setting, a signal is sent to the boiler to turn on. Unfortunately, the thermostat only tells the boiler to turn on when the house is too cold or turn off when the house is too warm. There is no in-between.


How many miles per gallon would your car get if the only method of controlling your speed was to accelerate until you're going too fast, and then apply the brakes?
How Your Heating System Should Work...

You adjust your car's gas pedal to maintain a comfortable driving speed and good fuel economy. Why not the same with your heating system? By adding a tekmar Outdoor Reset Control, heating system water temperatures are adjusted to maintain comfort and improve system efficiency.



It's Not Your Heating System's Fault!


If a heating system does not know if it is a cool autumn night or the coldest winter day, it works as if it's always the coldest day of the year and heats the water to a maximum temperature. Having this hot water in the distribution piping when it's not needed results in stand-by heat loss. By adding a tekmar Outdoor Reset Control that works alongside of your boiler and thermostat, you may see energy savings of up to 30%.



For More Information on Outdoor Reset, Tekmar 256 Control click here.



Scheduling & Setback:

Many tekmar thermostats include easy to use scheduling features. Scheduling allows for a reduction in temperature (setback) for rooms that are not expected to be in use. More detailed information about scheduling and setback can be found here.



Purging

This feature allows for continued circulation of any heat left in the high temperature areas of the system. Residual heat is used by the living space instead of being lost to the mechanical room. Some controls will also supply heat using circulating water prior to operating the boiler if it appears that there is enough heat left in the system to satisfy current requirements. This means that the boiler is turning on and off less frequently, saving fuel.

Reznor Ultra High Efficiency Condensing Gas Fires Unit Heaters - 93%

Reznor® V3 Series Model UEAS gas-fired, high efficiency, separated combustion unit heaters are available in 4 sizes ranging from 131,000 to 305,000 BTUH gas input. Heaters are designed for up to 93% thermal efficiency and are approved for installation in the United States and Canada by ETL.

Reznor® V3 Series unit heaters have a refreshing appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from 4 suspension points. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a “G” terminal to the low voltage strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection. The secondary heat exchanger has a 1/2” PVC pipe for attaching a coupling for ease of installation and cleaning of the required condensate drain. A 4” PVC cleanout cap that is drilled and tapped for a 1/2” NPT fitting is furnished with the heater for attaching the vent condensate drain.

The preeminent new internal feature is the Tcore3® heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with 100% lockout, pressure switch to verify vent flow, venter motor, aluminum venter wheel with housing, resiliently isolated axial fan and motor assembly, a high temperature limit control, interlock door switch, and a built-in disconnect switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.

Product Features

Up to 93% Thermal efficient ~ Most efficient unit heater in the world!

50-60°F Rise range.

Arranged for use with natural gas (propane conversion kit included with unit).

NEW Tcore3 ® titanium stabilized aluminized steel heat exchanger.

NEW patented A Tcore3 ® single burner combustion system including a one-piece burner assembly.

NEW extruded aluminum secondary heat exchanger (patent pending).

115/1/60 Supply voltage.

115 Volt open fan motor with internal overload protection.

Transformer for 24-volt controls.

Integrated circuit board with diagnostic indicator lights.

Multi-try direct ignition with 100% lockout.

Fan relay (included on the circuit board).

Single-stage natural gas valve (field adjustable for operation to 10,000 ft. [3,000 meters] elevation).

Vibration/noise isolated fan motor.

Sealed control compartment houses all electrical components.

48 frame, ball bearing, PSC venter motor.

4-point Suspension.

Built-in disconnect switch (20A @ 115V Rating).

External terminal strip for 24-volt wiring.

Sealed junction box for supply wiring.

External gas connection.

Fully gasketed door panel with safety door switch.

Full fan guard ~ engineered for safety.

Improved cabinet design with less visible hardware and a NEW Reznor appearance.

Product Warranty

5 years parts / 10 years heat exchanger

Viessmann Solar Hot Water Packages

Viessmann now offers prepackaged, specially engineered, complete, integrated Solar Water Heating Systems that make the most of the sun’s abundant energy.
All materials are highly reliable and work together to ensure superior system performance. Viessmann complete package is ready to be professionally installed quickly and easily.
All of this plus the added assurance of a detailed warranty plan. This package use Votosol 200-F flat plate solar collectors and 79 gallons Vitocell-V100 single-coil DHW tank. It does come with all items to complete installation. Mounting hardware is for Sloped or Shingled roofs.
Simplify the planning, ordering and installation of your solar system with our complete solar system packages. Choose from a single-tank system to integrate with a boiler system or from a retrofit preheat system as a preheat to an existing domestic hot water heating system.

Viessmann solar system packages are sized based on the typical domestic hot water requirements of a 3-4 person family.

Features and Benefits of the Viessmann Vitosol 200-F Solar Water Heating System:

• Optimized collection of solar energy thanks to highly efficient Sol-titanium coating.
• Rugged, high-quality construction using impact-resistant solar glass, copper, aluminum and nondegrading thermal insulation.
• 79 Gallon steel construction and Viessmann Ceraprotect permanent two-coat enamel finish.
• Maximum system performance and reliability with a full range of solar system components designed to integrate seamlessly.
• Fast installation with flexible connection pipes and quick-connect fittings. Prefabricated collector mounting hardware ensures easy connection to roofs.
• Suitable for many applications. Best suited for DHW or pool heating.
• OG-100 Certified by the Solar Rating and Certification Corporation (SRCC).

Viessmann Single Coils Tank Solar Water Heating system kit is intended for 3 to 4 person households and includes the following:

2- Vitosol 200-F, SV2 Flat Plate Solar Collectors, Total 49.5 Square Feet Area
1- 79 Gal, Vitocell-V 100 Single Coil DHW Storage Tank.
1- DN-20 Solar Divicon preassembled pumping station with integrated system fill manifold and automatic air vent and air separator.
1- SCU124 Solar Control Unit with DWH sensor and Collector temperature sensor.
1- Solar Expansion Tank 25L with mounting hardware.
1- Fast Air Vent with shut-off valve, brass piping tee and 2 brass compression couplings.
1- Pair of Interconnection Pipe between collectors.
1- General Connection Set for field ends.
1- Sensor Well Set for Vitorsol 200-F.
1- Mounting Hardware for sloped, shingled roofs.
1- Installation Fittings set to adapt from metric to 3/4" pipe.
1- Brass elbow with sensor well for tank temperature sensor.
5.3 Gallons of Tyfocor-HTL Glycol Solar Fill.
Factory tested.
Product Warranty
10 Years Panels/ 8 Years DHW Tank

The New Effinity93 by Modine

Your Extended Forecast:
93% Efficiency with
100% Chance of Savings.

What does the Effinity93 ( PTC) mean for you and your operation?
• Substantial energy savings each heating season
• A ‘greener’ greenhouse and a reduced carbon footprint
• A smart investment that produces substantially lower
energy bills, providing a respectable ROI


The Effinity93 (PTC) is the most efficient gas fired unit heater in North America, translating into enormous energy saving opportunities.
With six models available — from 135,000 to 310,000 BTU/hr — all operating at 93% efficiency, the Effinity93 (PTC) will dramatically lower your energy costs through decreased fuel consumption.
Rated with the highest average efficiency of any gas fired unit heater line in North America, Modine delivers the green in your greenhouse.
Made in USA

Product Features :

• CSA certification for commericial and industrial use in the US and Canada
• CSA certification for residential use in the US and Canada
• Uses 100% outside air for combustion.
• Sealed compartment protects combination gas control, ignition control, manifold and burner.
• Industry-proven, AL29-4C stainless steel secondary heat exchanger relieves fears of failure .
• The PTC condensing unit heater line utilizes a bent tube heat exchanger and is ready for quick PVC pipe connections.
• 93% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster .
• Horizontal or vertical concentric vent kits are available.
• Vented with 3” and 4” PVC vent pipe for quick, simple, and cost effective installations.
• Quiet operation.
• 20 gauge aluminized steel cabinet .
• Aluminized steel heat exchanger (409 stainless steel optional)
• Adjustable air-deflector blades .
• Fans engineered for quiet operation .
• Totally enclosed fan/blower motors .
• Permanently-lubricated motor for trouble-free dependability.
• High temperature limit protection .
• Gas control step down transformer with 24V gas controls .
• Direct spark ignition with continuous retry control system .

Product Warranty
2 years parts / 10 years heat exchanger

We introducing New Product for North American Market- Eternal Hybrid Water Heater.

What is Hybrid Water Heater and why it is better solution for your house than Tankless Water Heater or Tank Type Water Heater?

Eternal hybrid is a more effective water heating system. The advanced multi-pass heat exchanger drives heat downward then recycles it through 44 baffled stainless steel pipes for maximum efficiency. Water spreads thinly and evenly around the 44 heating pipes to absorb heat quickly. Cold water flows from the bottom up to prevent sedimentation build-up associated with other designs and the straight water-flow design eliminates pressure loss associated with coiled pipes. And because water flows around the pipes — not through them — there is no risk of build-up inside the pipes.

• Patented counter-flow technology maintains 86% efficiency and delivers hot water faster than tankless units for multiple applications at once .
• Half the size of a 50 gallon tank water heater with 300% higher output .
• Built-in reservoir eliminates cold water sandwich and allows you to build a recirculation system with no external electric tank .
• Extremely low exhaust temperature allows Eternal to be PVC vented for easier, more economical installs .
• Multistage safety features .
• Near zero greenhouse gas emissions means Eternal is one of the cleanest burning appliances on the market .
• Stainless steel reservoir is self cleaning and maintenance free, and backed with a 20 year no-leak warranty on stainless steel heat exchanger tank for residential, 10 year warranty for commercial, limited 3 year warranty on all other parts, and 1 year warranty on reasonable labor

ProMelt Electric Snow Melt - Makes All Easy

We are introducing New Product from Watts Radiant on the Heating Needs Market- ProMelt Electric Snow Melt Mats and Cable.

NEW ProMelt Cables & Mats Our new snow melting mats and cables clear snow and ice to make
walking and driving safer. They install below concrete, asphalt, stone or brick, and even under exterior tiles.

Melt your troubles away!

Snow melt sidewalks between buildings to reduce injury, liability and snow removal labor. Electric snow melting can be zoned and operated with automatic controls.

Features and Benefits of the ProMelt electric Snow Melting Mats and Cables:

• Listed by UL® for the U.S. and Canada, and tested by Tile Council of North America for all residential and moderate commercial applications.
• ProMelt Cable is a complete heating cable consisting of a series resistance heating cable and a single power lead for easy single-point connection.
• ProMelt offers the largest selection of mats in the industry with over 60 sizes manufactured in three widths (2 and 3 ft. wide) in lengths covering up to 160 sq. ft. — with one mat!
• The industry’s first twisted, twin-wire construction creates ultra-low EMF.
  The industry’s Only shielded and fully grounded 10-ft. power lead provides safety and jobsite durability.
• Power leads are color-coded for 120 VAC or 240 VAC.

Made in the USA.

Other Standard Features :

• The industry’s highest-quality heating wire using Aramid reinforcing.
• ETFE high-temperature insulation.
• Job site-tough polyurethane jacket.
• Oxygen-free copper heating elements for corrosion resistance.
• Braided copper ground plane.
• 120, 208, 240, 277 VAC, 1-phase available for small residential to large commercial applications.
• 50 W/sqft (170 Btu/h/sqft) and 38 W/sqft (130 Btu/h/sqft).

Product Warranty

10-years Limited Warranty

eComfortUSA the Leading Distributor of Finest Home Products

Welcome to eComfortUSA.com where our striving for excellence in providing superior customer service makes us the leading distributor of finest products in heating, cooling and plumbing industry.

We offer a wide range of highest quality products from the best American and European manufactures. From Ultra High Efficiency Gas Boilers, Designer Radiators , High Velocity HVAC Systems to complete line of Radiant Heat Products, Solar Systems and Geothermal Technologies. All of our products are carefully researched to provide our clients with the latest most energy efficient heating and cooling technologies available today.Our skilled technicians provide heating and cooling heat loss calculations with list of material needed for specific jobs. We provide an nonparallel technical support to all of our clients and answer any questions through out the installation. With hundreds of satisfied customer through out he United States and Canada you can be assured that your next purchase with eComfortUSA will be an amazing experience

HydroNex Per-Piped Mixing Radiant Panels Benefits

HydroNex panels are the perfect solution for any radiantproject: floor warming, heating, or snowmelting. Pre-piped, pre-wired, and factory tested with a professionallooking enclosure, these panels will dramatically reduceinstallation times as well as virtually eliminate wiring andother start-up problems.

Each panel comes pre-wired with a 120 volt power cord. Simply plug the HydroNex panel(s) into a standard wall outlet.

Electrical connections are even easier with the CAT5 connection system. Control logic passes between panelsthough a CAT5 cable, enabling each panel to “talk” to each other. The only wiring required is to connectthe zone thermostats to the correspondingrelay terminal.

Connecting one panel to another is as easyas turning the hex nut on the brass o-ringseal union. Each union can withhold up to 100psi when only hand tightened.

Why HydroNex?

• Fast installation – Cut installation time and make more money!
• Simplify bids with fixed costs
• Easy maintenance
• Factory assembled and tested – HydroNex panels are guaranteed to perform
• Professional presentation
• Performance engineered
• Plug-n-play CAT5 electrical connectors – Reduce wiring and start up problems
• Multiple panel confi gurations
• Proper piping and component placement
• Convenient purge assemblies & control valves